imagistics ipc1-im6530 Administrator's Manual page 213

Windows 2000
Windows XP
At least 60 MB free disk space on the destination drive; 120 MB for
optimal performance.
To ensure successful implementation:
Close all Windows applications before installing the new software.
If an old version of Imagistics client software is installed, right-click
the document monitoring application icon in the system tray, then
choose
If your workstation had a previous version of Imagistics software
installed, the setup program detects it and opens the Client Setup
Maintenance Program. Click
components.
You can also use the Windows Add/Remove Programs option,
accessible from the Windows Control Panel, to delete the old software.
Client Setup
1 Insert the ipc1-im8130 Client CD-ROM into the workstation CD-ROM
drive. If
automatically.
Otherwise, choose
Setup.exe file on the CD-ROM. Click
program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
ipc1-im8130 Administrator's Guide
im6530, im8130
Microsoft Windows 2000 Service Pack 1 or higher
Novell Client v4.7 or higher with Z.E.N works Starter Pack is
required to run IPX-based SNMP access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
Novell Client v4.82 or higher is required to run IPX-based SNMP
access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
from the short-cut menu.
Exit
is enabled, the InstallShield Setup Wizard starts
Auto-Run
Run
Enter a destination directory or accept the default location.
Select the drivers and fonts to install.
to delete all previously installed
Remove
from the Start menu and then locate the
OK
to launch the setup
191