imagistics ipc1-im6530 Administrator's Manual page 187

Generic lp and lpipc Options
Copies
The number of copies of a print job is specified using the -n <value>
parameter with the lp command. The copy count is displayed on the
banner page. The default value is determined by the lp command and is
always 1. The copies are always collated.
Title
You can specify the title printed on the banner page using the
-t <title> parameter with the lp command. The default value is
determined by the lp command and is usually the name of the print file.
If multiple files are printed using the same lp command the default title is
set to the name of the first file by the lp command.
General Controller Options
The following options apply to all controller print files.
Print Language
The net_ipc1im8130 program needs to know what printer language is
used in each of the files that it is printing so that it can issue the correct
commands to select various options. The following options are valid for
the print languages.
Option Alternate
Value Value
auto
pcl
postscript ps
raw
ipc1-im8130 Administrator's Guide
im6530, im8130
Print Language Options
Description
Each file to be printed is examined to see if it starts with
the "%!" sequence. If it does, then it is assumed that it is
a PostScript file, otherwise it assumes that it is a plain
text or a PCL5e file.
The print file is always treated as a plain text or a
PCL5e file.
The file is always treated as a PostScript file.
The file is treated as a fully formatted file that already
contains all the necessary commands. The file is sent to
the printer without any modifications. In this mode no
other options are valid and a banner page is not printed.
165