Installing Client Software - imagistics ipc1-im6530 Administrator's Manual

Uploading Software to the Controller
1 Log in as an administrator.
2 On the
3 Click the
4 Click the
software to upload.
5 Click
6 Click

Installing Client Software

End users can install the software on their workstations through Printer
Utility (except for the Unix filters). Additional instructions are in the
Operator's Guide.
To install the client software on a workstation:
1 Click the
2 Click the link for the type of software to install. The options are
Drivers
3 Check the boxes for the software components to install.
4 Click
Removing Software from the Controller
You can remove client software from the controller to free up memory
space.
1 Log in as an administrator.
2 On the
3 Click the
4 Check the boxes for the software to remove.
5 Click
ipc1-im8130 Administrator's Guide
im6530, im8130
tab, click the Maintenance submenu.
Administration
Upload Software
drop-down arrow and select the language of the
Language
and locate the specified files to upload.
Browse
.
Upload
Install Software
, ,
Unix Filters Macintosh PPD Files
.
Install
tab, click the Maintenance submenu.
Administration
Remove Software
.
Delete
link.
link at the bottom of the screen.
, or
Scan Driver
link.
Print
.
117