Setting The Print Calibration - imagistics cm4530 User Functions Manual

1.SETTING GENERAL FUNCTIONS (Cont.)

Setting the Print Calibration

The print calibration setting in the [USER] menu can be configured only when an administrator has set the
Calibration Display Level to [USER]. "Setting the Calibration Display Level"
This function allows the machine automatically to calibrate the color gradation for print jobs when the color
cannot be adjusted well because the shading or the hue of the image has deviated. You can calibrate for
the PostScript and PCL separately. In addition, you can calibrate for 600 dpi and 1200 dpi print jobs for
each emulation separately.
3
- Set the LT-sized or A4-sized paper (recommended paper) in the cassette before starting the calibration.
If any other paper is used, calibration may not be performed properly.
- If the color often deviates, call your service technician.
- If the glass is dirty or any foreign objects are stuck to the glass, the calibration may not be carried out
properly. Keep the glass clean.
- Never raise the original cover or the optional reversing automatic document feeder, or open the front
cover while the calibration is in progress. If this does happen, the calibration cannot be finished
appropriately.
- Interrupt copying is not available during the calibration.
1
Place the LT-size or A4-size paper in the
cassette.
2
Press the [USER FUNCTIONS] button on
the control panel to enter the User
Functions menu.
3
Press the [USER] button, and then press
the [GENERAL] button on the touch panel.
- The GENERAL menu is displayed.
74
3.SETTING ITEMS (USER)
Page 107