imagistics ipc1-im6530 Administrator's Manual page 202

6 lines per inch
Auto-wrap on
Automatic carriage-return when a line-feed is sent
The banner page is designed to fit Statement/A5 and larger paper. If the
paper selected is smaller, the banner page may wrap onto two pages.
The default setting causes the banner page to print before the job so that
it is in the correct stacking order.
When the language is set to raw the banner is always disabled.
You can set the paper source and the media type for the banner page to
different values than the job paper source and media type. If a banner
paper source is not specified, the auto source command is sent. If a
banner media type is not specified, no banner media type command is
sent, so the default value is used.
If the file being printed specifies the paper destination or the paper size
internally, the banner page may print to the wrong output or on an
incorrect paper size.
Banner Options
Control the appearance of the banner page with the following options.
Option Value Alternate Value Description
banner=last
banner=first banner
nobanner nb
The default value for this option is that the banner page prints first.
180
im6530, im8130
Banner Page Options
Print the banner after the job so that it will be physically
on top of the job in the output tray.
Print the banner before the job so that it will be physically
under the job in the output tray.
Do not print a banner. The ability to specify the
"nobanner" option can be disabled by the system
administrator to force all jobs to print with a banner. Even
if the "nobanner" option is disabled the banner can still
be disabled by using the "nb" or the "raw" option.
ipc1-im8130 Administrator's Guide