Print Server Mode - imagistics ipc1-im6530 Administrator's Manual

10 In the
created (Step 1 on page 140), for example, ipc1_2_PS.
11 In the
created (Step 3 on page 140).
For Bindery mode, the number is between
number is between
12 Scroll to the bottom of the page, then click
13 Proceed to

Print Server Mode

Considerations and Limitations
You must enable IPX/SPX protocol before running the controller in
print server mode.
You cannot attach any other printers to a controller running in print
server mode. This supersedes the 255-printer limit imposed by
NetWare.
Prerequisites
Use the NetWare management utility PCONSOLE (for NetWare 4.x bindery
mode) or NWAdmin (NetWare 4.x, 5.x, or 6.x NDS mode) to perform the
following steps before enabling Novell print services through Printer
Utility.
Note: When using NetWare PCONSOLE version 4.x.x., toggle between
NDS and Bindery modes using the F4 key.
For more information, refer to your Novell NetWare documentation.
142
4.x/5.x Mixed Mode
field, enter the name of the print server you
Print Server Name
field, enter the number assigned to the printer you
Printer Number
and
0
Installing Client Software
im6530, im8130
.
254
on page 189.
ipc1-im8130 Administrator's Guide
and ; for NDS mode, the
0 15
.
Save