imagistics ipc1-im6530 Administrator's Manual page 147

In the status area at the top of the screen, the
the third line. It shows either
transfer rate.
4 Choose the N
two network types differ slightly.
5 Press the down arrow to navigate through the wireless options.
6 If required, set up WEP security. Press the down arrow to continue. If
you enable WEP security, the
the next screen, configure the
ipc1-im8130 Administrator's Guide
im6530, im8130
Not Connected
:
T
ETWORK YPE Infrastructure
Wireless Options
Encryption
Default Access Point
Default Access Point Options
is shown on
Data Rate
or it shows the current
or . The screens for the
Ad Hoc
and fields are enabled. In
Key
.
125