imagistics ipc1-im6530 Administrator's Manual page 203

Banner Paper Source
Specify the banner paper source using the following options.
Option Value Alternate Value Description
bauto-source
btandem
bexternal
bupper
blower
bpedupper
bpedlower
If the banner paper source is not specified, the PCL5e auto paper source
command <esc>&l7H is sent. You cannot set the banner page source to
manual feed. The paper size always has priority over the paper source.
Example: The command to specify that the banner page paper source to
the tandem LCF is lp –o btandem <filename>.
Banner Media Type
Select the banner page paper source through the media type using the
following options.
Option Value Description
Plain
Transparency
Tab
Thick1
Thick2
Cover
Insert
ipc1-im8130 Administrator's Guide
im6530, im8130
Banner Paper Source Options
bcas1
bcas2
bcas3
bcas4
Banner Page Media Type Selection via Paper
Source
The paper source that contains plain paper is requested.
The paper source that contains transparency slides is requested.
The paper source that contains tab paper is requested.
The paper source that contains disk labels is requested.
The paper source that contains letter labels is requested.
The paper source that contains cover paper is requested.
The paper source that contains insert paper is requested.
Select the auto paper tray selection.
Select the tandem paper tray.
Select the upper paper tray.
Select the upper paper tray.
Select the middle paper tray.
Select the pedestal upper paper tray.
Select the pedestal lower paper tray.
181