imagistics ipc1-im6530 Administrator's Manual page 170

Prerequisites
Install NDPS in the NetWare servers. NDPS comes with NetWare 5, but it
is not installed automatically. The NDPS install program extends the NDS
schema for three NDS objects:
NDPS manager (M)
NDPS broker (B)
NDPS printer agent (P)
To load the Imagistics NDPS gateway on NW4, besides loading
CLIBAUX.NLM, you need to have the Novell new localization conversion
tables installed in SYS:\SYSTEM. You can find these files in the latest
support pack 8a for NetWare 4.11 or 4.2. After you extract the support
pack compressed file, you must copy the UNI*.NLM files and
LOCNLM32.NLM to the SYS:\SYSTEM directory on the server.
Setup
1 Insert the ipc1-im8130 Admin's Client CD-ROM into the CD-ROM drive
on the administrative workstation.
2 Copy tndps.exe, the self-extracting executable file from the CD-ROM
to the workstation. Double-click the file to launch the InstallShield
setup program.
3 Follow the Setup Wizard prompts to supply the server volume or
Browse
4 Click
NetWare snap-in components have been installed, you can configure
the controller as an NDPS object.
Setting up the Controller as an NDPS Object
Considerations and Limitations
The Imagistics NDPS gateway should automatically discover the
controller. If not, manually create a new NDPS printer agent. (See
a Printer Agent
148
im6530, im8130
to select a mapped drive.
to proceed with installation. When the NDPS gateway and
Next
on page 149.)
ipc1-im8130 Administrator's Guide
Create