Configuring Agent Settings - imagistics ipc1-im6530 Administrator's Manual

1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the LPD Printing area, click the
5 Select
change.
6 Click
Configuring IPP (Internet Printing Protocol)
IPP Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the IPP Printing area, click the
5 Select
change.
6 Click
Configuring Mac Printing
Macintosh Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Mac Printing area, click the
5 Select
change.
6 Enter a
7 Enter a
8 Click

Configuring Agent Settings

The controller uses various utilities, known as transfer agents, to send
scanned files to different output destinations. The administrator sets up
ipc1-im8130 Administrator's Guide
im6530, im8130
link. The Print Services page opens.
Print Services
or as required for each service you want to
Enable Disable
.
Save
link. The Print Services page opens.
Print Services
or as required for each service you want to
Enable Disable
.
Save
link. The Print Services page opens.
Print Services
or as required for each service you want to
Enable Disable
.
Mac Printer Name
Mac Printer Name for Wireless
.
Save
subtab.
Setup
drop-down list.
Service
subtab.
Setup
drop-down list.
Service
subtab.
Setup
drop-down list.
Service
(if the wireless NIC is installed).
107