imagistics ipc1-im6530 Administrator's Manual page 43

2 Set the network speed to 10
to automatically sense and set the correct speed.
3 Press
Configuring AppleTalk Protocol Settings
1 From the Network Setting menu, press
AppleTalk Setting screen.
Note: Currently, the controller supports EtherTalk access only;
TokenTalk is not supported.
2 By default, Macintosh printing is enabled. If it has been disabled,
press
3 Press
4 Enter the AppleTalk name. The name is the same as the Microsoft
computer name (device name).
By default, the device name is GL<MAC Address>, where <MAC
Address> is the media access control number of the NIC installed in
the controller. For example, GL00DOC9165206. You can specify a
different name of up to 15 alphanumeric characters, provided it is
unique within your network.
ipc1-im8130 Administrator's Guide
im6530, im8130
to save your setting.
OK
AppleTalk Setting Screen
to establish Macintosh print services.
ENABLE
to display the touch keyboard.
APPLETALK NAME
or 100 . Alternatively, select
/ /
MB S MB S
APPLETALK
AUTO
to open the
21