Cannot Discover Device - imagistics ipc1-im6530 Administrator's Manual

Network
Configuration
Macintosh Environment
• AppleTalk and TCP/IP
protocols
• Peer to Peer networking
• Clients running on the
Macintosh platform

Cannot Discover Device

Problem Description
Controllers are discovered automatically using SNMP. When ipc1
Document Monitor cannot automatically discover an installed controller
over the network, the most likely cause is limitations of the protocols on
ipc1-im8130 Administrator's Guide
im6530, im8130
Resolving Network Connectivity and Printing
Issues (Continued)
Check...
1 Is AppleTalk enabled
on the controller?
2 Is TCP/IP set up on
the controller?
3 Is the controller
available in the
Chooser (MacOS 9) or
the Print Center (Mac
OSX) when you click
on the LaserWriter 8
printer icon?
4 Can you access any
other network device
from the Macintosh
workstation?
5 Can another
Macintosh workstation
on the network print to
the controller? If so,
compare the settings
to determine which
need to be changed to
support printing from
this machine.
For Instructions,
Yes No
→
Configuring
Next
AppleTalk
Step
↓
page 184.
→
Configuring TCP/IP
Next
Protocol Settings
Step
↓
page 17.
→
Next Make sure the
Step AppleTalk zone is
↓
supported by the
Macintosh client.
→
Next Refer to your Macintosh
Step networking
↓
documentation or
contact Macintosh
technical support.
→
End Refer to your Macintosh
networking
documentation or
contact Macintosh
technical support.
Go To...
on
on
253