Transfer Voltage Adjustment - Xerox VersaLink C8000W User Manual

Maintenance
a. Touch Paper Supply.
b. Touch the required tray.
5. Use the chart that you printed in
• To adjust Side 1, touch Adjusted Side, then touch Side 1.
• To adjust Side 2, touch Adjusted Side, then touch Side 2.
6. To adjust the registration, touch Lead/Side Registration.
• To adjust the side-to-side registration, for Side Registration, touch the Plus icon (+) or the
Minus icon (-).
• To adjust the top-to-bottom registration, for Lead Registration, touch the Plus icon (+) or the
Minus icon (-).
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
– For Lead Registration, a positive value shifts the image down the page.
– For Side Registration, a positive value shifts the image to the left.
7. To save your settings, touch OK→Adjust.
8. As needed, to enter more values, repeat the previous steps.
9. Print another sample page, then repeat the process until you complete the registration
corrections.
10. To return to the Home screen, press the Home button.
T T r r a a n n s s f f e e r r V V o o l l t t a a g g e e A A d d j j u u s s t t m m e e n n t t
Use Transfer Voltage Adjustment to specify the bias transfer roller voltage for printing on the selected
paper type. If the printed image is too light, increase the voltage for the paper that you are using. If
the printed image looks mottled or blotchy, decrease the voltage for the paper that you are using.
Note: When printing on special media, this adjustment is useful for improving the fusing
performance.
To adjust the transfer voltage:
1. At the printer control panel, press the Home button.
2. Log in as administrator. For details, refer to the System Administrator Guide at
office/VLC8000Wdocs.
3. Load paper in the Bypass Tray.
4. Touch Device→Support→Transfer Voltage Adjustment.
5. To select the paper type for the adjustment, touch Paper Type, then touch the paper type.
6. To specify the paper size and 1-sided or 2-sided, touch Print Settings.
a. To specify the paper size, touch Paper Size, then touch the paper size.
b. To select 1-sided or 2-sided for the adjustment, touch 2-Sided, then touch the needed
selection.
c. To save the settings, touch OK.
160 Xerox ® VersaLink
User Guide
Verifying Paper
® C8000W Color Printer
Registration, then select the side for registration.
www.xerox.com/