About This Document; E-Sit-Ctc-20021203-0003 V1.0 - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

About this Document

Introduction
Welcome to the SpeedTouch
For the Service Provider this Reference Guide aims to give a concise and practical document for creating a customized
configuration profile file, based on the SpeedTouch
configure the SpeedTouch
For the fastidious user this Reference Guide aims to give a handbook for advanced and detailed configuration and trou-
bleshooting of the SpeedTouch
This CLI Reference Guide covers the CLI commands of the following DSL SpeedTouch
TM
SpeedTouch 510
•
TM
SpeedTouch 510i
•
TM
SpeedTouch 530
•
TM
SpeedTouch 570
•
TM
SpeedTouch 570i
•
Contents
The Reference Guide consists of two main parts:
CLI Navigation
•
The CLI navigation is decribed in this chapter. Here the user is familiarised with the SpeedTouch
It describes general manipulations to navigate through and to perform some operations on the CLI.
CLI Command Description
•
The other chapters describe all the available CLI commands of the SpeedTouch
and in alphabetical order.
Each command is described in a systematic manner:
The full name of the CLI command (including the group selection)
•
A short description of the CLI command, if needed completed by a description of the possible impact on the
•
user and/or the SpeedTouch
The syntax of the command with a description of each parameter
•
An example to demonstrate the use of the CLI command
•
A list of related CLI commands.
•

E-SIT-CTC-20021203-0003 v1.0

TM
500Series Command Line Interface (CLI) Reference Guide!
TM
500Series and PC(s).
TM
500Series via its character based Command Line Interface.
TM
500Series
TM
500Series CLI command set, to be used by the end-user to
TM
products:
TM
500Series CLI.
TM
500Series per command group
9