Ipv6 Mtu - Edge-Core ES3528MV2 Management Manual

Edge-core 28-port fast ethernet layer 2 switch
Table of Contents

Advertisement

Link-local address:
FE80::2E0:CFF:FE00:FD/64
Global unicast address(es):
2001:DB8:2222:7273::72/96, subnet is 2001:DB8:2222:7273::/96
Joined group address(es):
FF02::1:FF00:72
FF02::1:FF00:FD
FF02::1
IPv6 link MTU is 1280 bytes
ND DAD is enabled, number of DAD attempts: 3.
ND retransmit interval is 1000 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
Console#
R
C
ELATED
OMMANDS
ipv6 address link-local (1411)
show ipv6 interface (1414)
This command sets the size of the maximum transmission unit (MTU) for

ipv6 mtu

IPv6 packets sent on an interface. Use the no form to restore the default
setting.
S
YNTAX
ipv6 mtu size
no ipv6 mtu
size - Specifies the MTU size. (Range: 1280-65535 bytes)
D
S
EFAULT
ETTING
1500 bytes
C
M
OMMAND
Interface Configuration (VLAN)
C
U
OMMAND
SAGE
The maximum value set by this command cannot exceed the MTU of
the physical interface, which is currently fixed at 1500 bytes.
IPv6 routers do not fragment IPv6 packets forwarded from other
routers. However, traffic originating from an end-station connected to
an IPv6 router may be fragmented.
All devices on the same physical medium must use the same MTU in
order to operate correctly.
IPv6 must be enabled on an interface before the MTU can be set.
ODE
– 1413 –
| IP Interface Commands
C
45
HAPTER
IPv6 Interface

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es3528mv2-dc

Table of Contents