Physical Setup Of The Router; Set The Router On A Desktop Or Other Flat, Secure Surface; Rack-Mounting The Router; Wall-Mounting The Router - Edge-Core VR-100 User Manual

VR-100 8-Port Dual-WAN VPN Router

Physical Setup of the Router:

You can set the Router on a desktop, install it in a rack with attached brackets, or mount it on
the wall.

Set the Router on a desktop or other flat, secure surface.

Do not place excessive weight on top of the chassis that could damage the chassis.

Rack-Mounting the Router

The Router comes with two brackets and eight screws for mount with a 19-inch rack. The
attached brackets are shown as below. Line up the bracket holes with the holes located on the
Router's sides. Attach the mounting brackets using the included screws, four on each side of
the Router. When the brackets are attached to the Router, you can rack-mount it. Attach the
Router to the rack, using two screws on each side of the Router.

Wall-Mounting the Router

The Router is with two holes on the bottom, and the horizontal distant between two holes is
94mm. After the nails are secured on the wall, you can wall-mount it.
• 8 •