Edge-Core ES3528MV2 Management Manual page 130

| Basic Management Tasks
C 4
HAPTER
Managing System Files
ftp://switches:upgrade@192.168.0.1/switches/opcode/
■
The user name is "switches" and the password is "upgrade". The
image file is in the "opcode" directory, which is within the "switches"
parent directory, relative to the FTP root.
W I
EB NTERFACE
To configure automatic code upgrade:
Click System, then File.
1.
Select Automatic Operation Code Upgrade from the Action list.
2.
Mark the check box to enable Automatic Opcode Upgrade.
3.
Enter the URL of the FTP or TFTP server, and the path and directory
4.
containing the operation code.
Click Apply.
5.
Figure 11: Configuring Automatic Code Upgrade
If a new image is found at the specified location, the following type of
messages will be displayed during bootup.
.
.
.
Automatic Upgrade is looking for a new image
New image detected: current version 1.1.1.0; new version 1.1.1.2
Image upgrade in progress
The switch will restart after upgrade succeeds
Downloading new image
Flash programming started
Flash programming completed
The switch will now restart
.
.
.
– 130 –