Configuring Login Security - Dell SonicWall SRA 4200 Administrator's Manual

Login Security
The Login Security section provides a way to configure administrator/user lockout for a set
period of time (in minutes) after a set number of maximum login attempts per minute.
Web Management Settings
The Web Management Settings section allows the administrator to set the default page size for
paged tables and the streaming update interval for dynamically updated tables in the
management interface.
The following paged tables are affected by the Default Table Size setting:
•
•
•
The minimum for the Default Table Size field is 10 rows, the default is 100, and the maximum
is 99,999.
The following dynamically updated tables are affected by the Streaming Update Interval setting:
•
•
•
•
The minimum for the Streaming Update Interval field is 1 second, the default is 10 seconds, and
the maximum is 99,999.
SNMP Settings
The SNMP Settings section allows the administrator to enable SNMP and specify SNMP
settings for the appliance. A list of downloaded MIBs is displayed to the right of the fields. MIBs
can be downloaded from MySonicWALL.
GMS Settings
The GMS Settings section allows the administrator to enable GMS management, and specify
the GMS host name or IP address, GMS Syslog server port and heartbeat interval (in seconds).

Configuring Login Security

SRA appliance login security provides an auto lockout feature to protect against unauthorized
login attempts on the user portal. Complete the following steps to enable the auto lockout
feature:
Navigate to System > Administration.
Step 1
Select the Enable Administrator/User Lockout check box.
Step 2
In the Maximum Login Attempts Per Minute field, type the number of maximum login attempts
Step 3
allowed before a user will be locked out. The default is 5 attempts. The maximum is 99
attempts.
104 | SRA 6.0 Administrator's Guide
Secure Virtual Assist > Log
Web Application Firewall > Log
Log > View
System > Monitoring
Network > Interfaces
NetExtender > Status
Users > Status