Adding An Analyzer Server - Dell SonicWall SRA 4200 Administrator's Manual

Adding an Analyzer Server

This feature requires an Analyzer license key. To add the SRA appliance to an Analyzer server
and enable Analyzer reporting on your SRA appliance, complete the following steps:
Navigate to the Log > Analyzer page in the SRA Web management interface.
Step 1
Note
In the Analyzer Settings section, click the Add button. The Add Analyzer Server screen
Step 2
displays.
In the Add Analyzer Server screen, enter the Hostname or IP Address of your Analyzer server.
Step 3
Enter the Port which your Analyzer server communicates with managed devices. The default
Step 4
is 514.
Click Accept at the top of the page to add this server.
Step 5
To start Analyzer report logging for the server you just added, select the Enable Analyzer
Step 6
check box.
352 | SRA 6.0 Administrator's Guide
If you are using Analyzer for the first time on this appliance or if you do not have a
valid license, the page provides a link to the System > Licenses page to activate
your license.