Dell SonicWall SRA 4200 Administrator's Manual page 299

Adding a Policy for an IP Address Range
In the Apply Policy to field, click the IP Address Range option.
Step 1
Define a name for the policy in the Policy Name field.
Step 2
Type a starting IP address in the IP Network Address field.
Step 3
Type a subnet mask value in the Subnet Mask field in the form 255.255.255.0.
Step 4
In the Port Range/Port Number field, optionally enter a port range or an individual port.
Step 5
In the Service drop-down list, click on a service option.
Step 6
In the Status drop-down list, click on an access action, either Allow or Deny.
Step 7
Click Accept.
Step 8
Adding a Policy for All Addresses
In the Apply Policy to field, select the All Addresses option.
Step 1
Define a name for the policy in the Policy Name field.
Step 2
The IP Address Range field is read-only, specifying All IP Addresses.
Step 3
In the Service drop-down list, click on a service option.
Step 4
In the Status drop-down list, click on an access action, either Allow or Deny.
Step 5
Click Accept.
Step 6
Setting File Shares Access Policies
To set file share access policies, perform the following steps:
Navigate to Users > Local Users.
Step 1
Click the configure icon next to the user you want to configure.
Step 2
Select the Policies tab.
Step 3
Click Add Policy.
Step 4
Select Server Path from the Apply Policy To drop-down list.
Step 5
Type a name for the policy in the Policy Name field.
Step 6
Select the Share radio button in the Resource field.
Step 7
Users Configuration | 299