Dell SonicWall SRA 4200 Administrator's Manual page 246

To configure the settings for CSRF protection, perform the following steps:
Expand the Cross-Site Request Forgery (CSRF/XSRF) Protection section.
Step 1
In the Portals drop-down list, select the Application Offloading portal to which these CSRF
Step 2
protection settings will apply. To make these CSRF settings the default for all portals, select
Global.
For Protection Mode, select the desired level of protection against CSRF attacks. You can
Step 3
select Detect Only to log these attacks, or Prevent to log and block them. Select Disabled to
disable CSRF protection on the portal.
When finished, click Accept.
Step 4
246 | SRA 6.0 Administrator's Guide