Configuring Web Application Firewall Settings - Dell SonicWall SRA 4200 Administrator's Manual

Configuring Web Application Firewall Settings

The Web Application Firewall > Settings page allows you to enable and disable Web Application
Firewall on your SRA appliance globally and by attack priority. You can individually specify
detection or prevention for three attack classes: high, medium, and low priority attacks.
This page also provides configuration options for other Web Application Firewall settings. The
following sections describe the procedures for enabling and configuring Web Application
Firewall settings:
•
•
•
•
•
•
•
•
Enabling Web Application Firewall and Configuring General Settings
To enable and activate Web Application Firewall, you must select the check box to globally
enable it and select at least one of the check boxes in the Signature Groups table. The settings
in the General Settings section on this page allow you to globally manage your network
protection against attacks by selecting the level of protection for high, medium, or low priority
242 | SRA 6.0 Administrator's Guide
"Enabling Web Application Firewall and Configuring General Settings" on page 242
"Configuring Global Exclusions" on page 243
"Configuring Intrusion Prevention Error Page Settings" on page 245
"Configuring Cross-Site Request Forgery Protection Settings" on page 245
"Configuring Cookie Tampering Protection Settings" on page 247
"Configuring Web Site Cloaking" on page 248
"Configuring Information Disclosure Protection" on page 248
"Configuring Session Management Settings" on page 250