Services > Policies; Adding A Policy - Dell SonicWall SRA 4200 Administrator's Manual

Services > Policies
The Services > Policies page within the Web-based management interface provides a single
interface for viewing service policies and access to configure policies for users and groups.

Adding a Policy

To add a policy, navigate to the Services > Policies screen within the management interface
and select the Add Policy... button. The Add Policy window opens.
Administrators can follow the following steps to add a service policy:
Use the Policy Owner drop-down menu to select whether the policy is owned as a Global
Step 1
Policy, a Local Domain group policy, or a policy assigned to an individual User.
In the Apply Policy To drop-down menu, select whether the policy will be applied to an
Step 2
individual host, a range of addresses, all addresses, a network object, a server path, or a URL
object. You can also select an individual IPv6 host, a range of IPv6 addresses, or all IPv6
addresses. The Add Policy dialog box changes depending on what type of object you select
in the Apply Policy To drop-down list.
Note
These SRA policies apply to the destination address(es) of the SRA connection, not
the source address. You cannot permit or block a specific IP address on the Internet
from authenticating to the SRA gateway with a policy created on the Policies tab.
However, it is possible to control source logins by IP address with a login policy created
on the user's Login Policies tab. For more information, refer to
Policies" section on page 312.
"Configuring Login
Services Configuration | 187