Dell SonicWall SRA 4200 Administrator's Manual page 366

Before you get started, take note of which port the WatchGuard is using for management. If the
WatchGuard is not being managed on HTTPS (443), perform the following steps. If the
WatchGuard is being managed on HTTPS (443) you'll need to first review the notes within this
guide.
Open browser and enter the IP address of the WatchGuard Firebox X Edge appliance (i.e.
Step 1
192.168.100.1). Once successful, you'll be brought to the "System Status" page (below).
If the WatchGuard's management interface is already configured to accept HTTPS on port 443
Step 2
you will need to change the port in order to be able to manage both the Dell SonicWALL SRA
and WatchGuard appliances.
Navigate to Administration > System Security.
Step 3
Figure 1
Clear the Use non-secure HTTP instead of secure HTTPS for administrative Web site
Step 4
check box.
Change the HTTP Server Port to 444 and click the Submit button.
Step 5
The WatchGuard will now be managed from the WAN on port 444. It should be accessed as
follows: https://<watchguard wan ip>:444
366 | SRA 6.0 Administrator's Guide
WatchGuard Administration > System Security Dialog Box