Network > Interfaces Overview; Configuring Network Interfaces - Dell SonicWall SRA 4200 Administrator's Manual

Network > Interfaces Overview
The Network > Interfaces page allows the administrator to configure the IP address, subnet
mask and view the connection speed of physical network interface ports on the SRA appliance.
Figure 18

Configuring Network Interfaces

The Network > Interfaces page allows the administrator to view and configure the IP address,
subnet mask, speed, and management settings of the X0, X1, X2, X3, and where available, the
X4 and X5 interfaces on the SRA appliance. For a port on your SRA appliance to communicate
with a firewall or target device on the same network, you need to assign an IP address and a
subnet mask to the interface.
Note If the management interface IP address changes, the SRA services will be automatically
restarted. This interrupts any existing user sessions, and users will need to reconnect to
continue using the SRA appliance.
To configure these settings for an interface on the SRA appliance, perform the following steps:
116 | SRA 6.0 Administrator's Guide
Network > Interfaces Page