System > Administration - Dell SonicWall SRA 4200 Administrator's Manual

Creating a Backup
To create a system backup of the current firmware and settings, click the Create Backup
button. The backup may take up to two minutes. When the backup is complete, the Status at
the bottom of the screen will display the message "System Backup Successful."
Downloading Firmware
To download firmware, click the download icon
want to download.
Booting a Firmware Image
To boot a firmware image, perform the following steps:
Click the boot icon
Step 1
appliance.
The pop-up message is displayed: Are you sure you wish to boot this firmware? Click OK.
Step 2
Uploading New Firmware
To upload new firmware, perform the following steps:
Login to MySonicWALL.
Step 1
Download the latest SRA firmware version.
Step 2
In the SRA management interface, navigate to the System > Settings page.
Step 3
Click the Upload New Firmware button under the Firmware Management section.
Step 4
Click Browse.
Step 5
Select the downloaded SRA firmware. It should have a .sig file extension.
Step 6
Click Open.
Step 7
Click Accept. Wait for the firmware to upload and be written to the disk.
Step 8
The System > Settings page displays the firmware table, with the uploaded firmware listed in
Step 9
it. Click the Boot icon in the Uploaded Firmware row to boot the new firmware with existing
settings.
System > Administration
This section provides an overview of the System > Administration page and a description of
the configuration tasks available on this page.
•
•
•
•
•
102 | SRA 6.0 Administrator's Guide
next to the Firmware Image version that you want to run on the SRA
"System > Administration Overview" section on page 103
"Configuring Login Security" section on page 104
"Enabling GMS Management" section on page 105
"Configuring Web Management Settings" section on page 105
"Configuring SNMP Settings" section on page 105
next to the Firmware Image version you