Dell SonicWall SRA 4200 Administrator's Manual page 175

Adding New Members to a Load Balancing Group
To add members to a new or existing load balancing group:
When editing or adding a group from the Portals > Load Balancing page, click the Add
Step 1
Member button. The Load Balancing Member screen displays.
Enter a Member Name to uniquely identify this member within the Load Balancing Group.
Step 2
Enter a friendly name or description in the Comment field to identify this group by mousing over
Step 3
the group's page.
Select a Scheme to determine HTTP or HTTPS access. The default value is HTTPS.
Step 4
Enter the back end HTTP(S) server IP address in the IPv4/IPv6 Address field.
Step 5
Enter the Port for the back end server. The default value for an HTTPS connection is 443.
Step 6
Click the Accept button to add this member to the group.
Step 7
Portals Configuration | 175