Dell SonicWall SRA 4200 Administrator's Manual page 197

Navigate to the Users > Local Users page.
Step 1
Click on the configure icon
Step 2
launched.
Click on the Nx Settings tab.
Step 3
]
Configuring User Client IP Address Range
To configure a user client IP address range:
To configure an IPv4 address range for this user, enter the beginning of the range in the Client
Step 1
Address Range Begin field and the end of the range in the Client Address Range End field.
To give this user the same IP address every time the user connects, enter the IP address in
Step 2
both fields.
To configure an IPv6 address range for this user, enter the beginning of the range in the Client
Step 3
IPv6 Address Range Begin field and the end of the range in the Client IPv6 Address Range
End field. IPv6 configuration is optional.
To give this user the same IPv6 address every time the user connects, enter the IP address in
both fields.
Unless more than one user will be using the same username, which is not recommended,
Tip
there is no need to configure more than one IP address for the user client IP address range.
Click Accept.
Step 4
for the user you want to edit. The Edit User window is
NetExtender Configuration | 197