Setting Up The Operating System; Windows 10 Iot Enterprise Ltsb 2016; Overview; Boot Up And Login-Remote System Configuration - Dell Edge 3000 Installation And Operation Manual

Hide thumbs Also See for Edge 3000:

Table of Contents

Setting up the operating system

WARNING: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut

down the Edge Gateway.

The Edge Gateway is shipped with one of the following operating systems:

•

•

Ubuntu Core 16

NOTE: For more information about Windows 10 operating system, see https://support.microsoft.com/en-us.

NOTE: For more information about the Ubuntu Core 16 operating system, see www.ubuntu.com/desktop/snappy.

Windows 10 IoT Enterprise LTSB 2016

The Edge Gateway is shipped with Windows 10 IoT Enterprise LTSB 2016. For more information about Windows 10 operating system,

see https://support.microsoft.com/en-us.

Boot up and login—Remote system configuration

NOTE: The Edge Gateway 3003 can also be configured remotely.

Connect a network cable from the Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides

IP addresses.

NOTE: The first-time boot to Windows takes about five minutes for system configuration. Subsequent boots take

approximately 50 seconds.

Using the MAC address, obtain the IP address through your network's DHCP server or through a network analyzer.

On the Windows computer, search for Remote Desktop Connection and launch the application.

•

Computer name:

•

User name:

•

Password:

NOTE: Your computer must be on the same subnet as the Edge Gateway.

NOTE: Ignore any certification errors when connecting to your Edge Gateway.

5 5

Table of Contents