Dell SonicWall SRA 4200 Administrator's Manual page 313

To require the use of one-time passwords for the specified user to log into the appliance, select
Step 6
the Require one-time passwords check box.
Enter the user's email address into the E-mail address field to override any address provided
Step 7
by the domain. For more information about one-time passwords, see the
Overview" section on page
To configure email to external domains (for example, SMS addresses or external
Note
webmail addresses), you need to configure the SMTP server to allow relaying
between the SRA appliance and that domain.
To apply the policy you selected to a source IP address, select an access policy (Allow or
Step 8
Deny) in the Login From Defined Addresses drop-down list under Login Policies by Source
IP Address, and then click Add under the list box. The Define Address window is displayed.
In the Define Address window, select one of the source address type options from the Source
Step 9
Address Type drop-down list.
IP Address - Enables you to select a specific IP address.
•
IP Network - Enables you to select a range of IP addresses. If you select this option, a
•
Network Address field and Subnet Mask field appear in the Define Address window.
IPv6 Address - This enables you to select a specific IPv6 address.
•
IPv6 Network - This enables you to select a range of IPv6 addresses. If you select this
•
option, a IPv6 Network field and Prefix field appear in the Define Address window.
Provide appropriate IP address(es) for the source address type you selected.
Step 10
IP Address - Type a single IP address in the IP Address field.
•
IP Network - Type an IP address in the Network Address field and then supply a subnet
•
mask value that specifies a range of addresses in the Subnet Mask field.
IPv6 Address - Type an IPv6 address, such as 2007::1:2:3:4.
•
IPv6 Network - Type the IPv6 network address into the IPv6 Network field, in the form
•
2007:1:2::. Type a prefix into the Prefix field, such as 64.
Click Add. The address or address range is displayed in the Defined Addresses list in the Edit
Step 11
User Settings window. As an example, if you selected a range of addresses with 10.202.4.32
as the network address and 255.255.255.240 (28 bits) as the subnet mask value, the Defined
Addresses list displays 10.202.4.32–10.202.4.47. In this case, 10.202.4.47 would be the
broadcast address. Whatever login policy you selected will now be applied to addresses in this
range.
To apply the policy you selected to a client browser, select an access policy (Allow or Deny) in
Step 12
the Login From Defined Browsers drop-down list under Login Policies by Client Browser,
and then click Add under the list. The Define Browser window is displayed.
In the Define Browser window, type a browser definition in the Client Browser field and then
Step 13
click Add. The browser name appears in the Defined Browsers list.
The browser definition for Firefox, Internet Explorer and Netscape is:
Note
javascript:document:writeln(navigator.userAgent)
Click Accept. The new login policy is saved.
Step 14
46.
"One Time Password
Users Configuration | 313