Dell SonicWall SRA 4200 Administrator's Manual page 95

connected users exceeds your normal user license. The Spike License stays active until either
the number of users decreases back to your normal licensed amount or the Spike License
expires.
To activate or stop a Spike License, perform the following steps:
Purchase your Spike License from MySonicWALL and import it to the appliance, as described
Step 1
in "Activating or Upgrading Licenses" on page
Licensed, and the total users supported and number of usage days remaining in the Spike
License are shown on the System > Licenses page.
After reloading the page, the Spike License is listed as Off on the System > Licenses page.
Step 2
When you need to accommodate more users, click Activate. The status changes to Active.
Step 3
To stop an active Spike License, click the Stop button. The status goes back to Off, and the
Step 4
number of days remaining is updated.
92. After licensing, the status is updated to
System Configuration | 95