Dell SonicWall SRA 4200 Administrator's Manual page 338

To set a client IPv6 address range, enter a beginning IPv6 address in the Client IPv6 Address
Step 10
Range Begin field and an ending IPv6 address in the Client IPv6 Address Range End field.
In the Exit Client After Disconnect drop-down list, select Enabled or Disabled.
Step 11
In the Uninstall Client After Exit drop-down list, select Enabled or Disabled.
Step 12
In the Create Client Connection Profile drop-down list, select Enabled or Disabled.
Step 13
In the User Name & Password Caching drop-down list, select one of the following:
Step 14
•
•
•
Navigate to the Nx Routes tab.
Step 15
In the Tunnel All Mode drop-down list, select Enabled to force all traffic for the user, including
Step 16
traffic destined to the remote user's local network, over the SRA NetExtender tunnel. Tunnel
All Mode is disabled by default.
To add a client route, click Add Client Route...
Step 17
In the Add Client Route window, enter a destination network in the Destination Network field.
Step 18
For example, enter the IPv4 network address 10.202.0.0. For IPv6, enter the IPv6 network
address in the form 2007::1:2:3:0.
For an IPv4 destination network, type the subnet mask in the Subnet Mask/Prefix field using
Step 19
decimal format (255.0.0.0, 255.255.0.0, or 255.255.255.0). For an IPv6 destination network,
type the prefix, such as 112.
Click Add.
Step 20
Click Accept to save the configuration changes.
Step 21
Navigate to the Policies tab.
Step 22
To add a policy, click Add Policy...
Step 23
In the Apply Policy To drop-down list, select one of the following: IP Address, IP Address
Step 24
Range, All Addresses, Network Object, Server Path, URL Object, All IPv6 Address, IPv6
Address, or IPv6 Address Range.
Enter a name for the policy in the Policy Name field.
Step 25
In the fields that appear based on your Apply Policy To settings, fill in the appropriate
Step 26
information. For example, if you select IP Address in the Apply Policy To drop-down list, you
will need to supply the IP Address in the IP Address field and the service in the Service drop-
down list. If you select IPv6 Address Range, enter the beginning IPv6 address in the IPv6
Network Address field and the prefix that defines the IPv6 address range in the IPv6 Prefix
field. Optionally enter a port range (80-443) or a single port number into the Port Range/Port
Number field. This field is available when you select IP Address, IP Address Range, IPv6
Address, or IPv6 Address Range in the Apply Policy To drop-down list.
Click Accept to save the configuration changes.
Step 27
Click the Bookmarks tab.
Step 28
To add a bookmark, click Add Bookmark...
Step 29
Enter a bookmark name in the Bookmark Name field.
Step 30
Enter the bookmark name or IP address in the Name or IP Address field.
Step 31
338 | SRA 6.0 Administrator's Guide
Allow saving of user name only - Allow caching of the user name on the client. Users will
only need to enter their password when starting NetExtender.
Allow saving of user name & password - Allow caching of the user name and password
on the client. Users will be automatically logged in when starting NetExtender, after the first
login.
Prohibit saving of user name & password - Do not allow caching of the user name and
password on the client. Users will be required to enter both user name and password when
starting NetExtender.