Dell SonicWall SRA 4200 Administrator's Manual page 144

On the General tab, enter a descriptive name in the Portal Name field. See the
Step 2
General Portal Settings" section on page 132
this tab.
On the Offloading tab, select the Enable Load Balancing check box for load balancing among
Step 3
offloaded application servers.
Select one of the following from the Scheme drop-down list:
Step 4
•
•
•
Enter the host name or private IP address of the backend host into the Application Server
Step 5
Host field.
Optionally enter the IPv6 address of the backend host into the Application Server IPv6
Step 6
Address field.
In the Port Number (optional) field, optionally enter a custom port number to use for accessing
Step 7
the application.
In the Homepage URI (optional) field, optionally enter a URI to a specific resource on the Web
Step 8
server to which the user will be forwarded the first time the user tries to access the Application
Offloading Portal. This is a string in the form of:
/exch/test.cgi?key1=value1&key2=value2
When this field is configured, it redirects the user to the Web site's home page the first time the
user accesses the portal. This happens only when the user is accessing the site with no URL
path (that is, when accessing the root folder, for example: https://www.google.com/). This is not
an alias for the root folder. The user can edit the URL to go back to the root folder.
The key=value pairs allow you to specify URL query parameters in the URL. You can use these
for any Web site that does not have a default redirect from the root folder to the home page
URL. Outlook Web Access is one example, but note that most public sites do have a default
redirect.
Select the Enable URL Rewriting for self-referenced URLs check box if you want absolute
Step 9
URLs that refer to this application server in HTML, Javascript, or CSS content to be rewritten.
However, all the URLs may not be rewritten, depending on how the Web application has been
developed. (This limitation is usually the same for other WAF/SRA vendors employing reverse
proxy mode.)
Under Security Settings, select the Disable Authentication Controls, Access Policies, and
Step 10
CSRF Protection (if enabled) check box if you need no authentication, access policies, or
CSRF protection enforced. This is useful for publicly hosted Web sites.
To configure ActiveSync authentication, clear the Disable Authentication Controls check box
Step 11
to display the authentication fields. Select the Enable ActiveSync authentication check box
and then type the default domain name. The default domain name will not be used when the
domain name is set in the email client's setting.
144 | SRA 6.0 Administrator's Guide
Web (HTTP) – access the Web application using HTTP
Secure Web (HTTPS) – access the Web application using HTTPS
Generic (SSL Offloading) – use SSL offloading to access custom SSL applications
(non-HTTP(S) applications)
For more information about the Generic (SSL Offloading) option, see the
Generic SSL Offloading" section on page
for more instructions for configuring the fields on
146.
"Configuring
"Configuring