Netgear Wireless Router MR814 SSL configuration
This guide assumes that your NetGear Wireless Router is configured with an IP of
192.168.100.1 and your SRA appliance is configured with an IP of 192.168.100.2.
Navigate to Advanced > Port Management in the left-hand index of your Netgear
Step 1
management interface.
Click the Add Custom Service button in the middle of the page.
Step 2
Enter a service name in the Service Name field (ex. SRA)
Step 3
Enter 443 in the Starting Port field.
Step 4
Enter 443 in the Ending Port field.
Step 5
Enter the WAN IP address of the SRA appliance (ex.192.168.100.2) in the Local Server
Step 6
Address field.
Click the Accept button
Step 7
Your Netgear wireless router is now ready for operations with the SRA appliance.
Configuring the SRA Appliance with a Third-Party Gateway | 369