Dell SonicWall SRA 4200 Administrator's Manual page 319

Navigate to Users > Local Groups.
Step 1
Click the configure icon next to the group you want to configure.
Step 2
In the Edit Local Group page, select the NxSettings tab.
Step 3
Enter a beginning IPv4 address in the Client Address Range Begin field.
Step 4
Enter an ending IPv4 address in the Client Address Range End field.
Step 5
Enter a beginning IPv6 address in the Client IPv6 Address Range Begin field.
Step 6
Enter an ending IPv6 address in the Client IPv6 Address Range End field.
Step 7
Under NetExtender DNS Settings, type the address of the primary DNS server in the Primary
Step 8
DNS Server field.
Optionally type the IP address of the secondary server in the Secondary DNS Server field.
Step 9
Type the DNS domain suffix in the DNS Domain field.
Step 10
For SRA appliances supporting connections from Apple iPhones, iPads, or other iOS devices
using Dell SonicWALL Mobile Connect, the DNS Domain is a required field. This DNS domain
is set on the VPN interface of the iPhone/iPad after the device makes a connection to the
appliance. When the mobile device user accesses a URL, iOS determines if the domain
matches the VPN interface's domain, and if so, uses the VPN interface's DNS server to resolve
the hostname lookup. Otherwise, the Wi-Fi or 3G DNS server is used, which will not be able to
resolve hosts within the company intranet.
Under NetExtender Client Settings, select one of the following from the Exit Client After
Step 11
Disconnect drop-down list:
Use global setting - Take the action specified by the global setting. See
•
Settings" section on page
Enabled - Enable this action for all members of the group. Overrides the global setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
•
In the Uninstall Client After Exit drop-down list, select one of the following:
Step 12
Use global setting - Take the action specified by the global setting. See
•
Settings" section on page
Enabled - Enable this action for all members of the group. Overrides the global setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
•
In the Create Client Connection Profile drop-down list, select one of the following:
Step 13
Use global setting - Take the action specified by the global setting. See
•
Settings" section on page
Enabled - Enable this action for all members of the group. Overrides the global setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
•
In the User Name & Password Caching drop-down list, select one of the following:
Step 14
Use global setting - Take the action specified by the global setting. See
•
Settings" section on page
Allow saving of user name only - Allow caching of the user name for members of the
•
group. Group members will only need to enter their password when starting NetExtender.
Overrides the global setting.
Allow saving of user name & password - Allow caching of the user name and password
•
for members of the group. Group members will be automatically logged in when starting
NetExtender. Overrides the global setting.
337.
337.
337.
337.
"Edit Global
"Edit Global
"Edit Global
"Edit Global
Users Configuration | 319