Dell SonicWall SRA 4200 Administrator's Manual page 188

Follow the appropriate step below depending on your selection in the Apply Policy To menu.
Step 3
•
•
•
•
•
•
•
•
•
Select the service type in the Service drop-down list. If you are applying a policy to a network
Step 4
object, the service type is defined in the network object.
Select ALLOW or DENY from the Status drop-down list to either allow or deny SRA
Step 5
connections for the specified service and host machine.
When using Citrix bookmarks, in order to restrict proxy access to a host, a DENY rule must
Tip
be configured for both Citrix and HTTP services.
Click Accept to update the configuration. Once the configuration has been updated, the new
Step 6
policy will be displayed in the Services > Policies window.
188 | SRA 6.0 Administrator's Guide
IP Address - If your policy applies to a specific host, enter the IP address of the local host
machine in the IP Address field. Optionally enter a port range (for example, 4100-4200) or
a single port number into the Port Range/Port Number field. See
IP Address" section on page
IP Address Range - If your policy applies to a range of addresses, enter the beginning IP
address in the IP Network Address field and the subnet mask that defines the IP address
range in the Subnet Mask field. Optionally, enter a port range (for example, 4100-4200) or
a single port number into the Port Range/Port Number field. See
IP Address Range" section on page
All Addresses - If your policy applies to all IPv4 addresses, you do not need to enter any
IP address information. See
Network Object - If your policy applies to a predefined network object, select the name of
the object from the Network Object drop-down list. A port or port range can be specified
when defining a Network Object. See
Server Path - If your policy applies to a server path, select one of the following radio
buttons in the Resource field:
Share (Server path) - When you select this option, type the path into the Server Path
–
field.
Network (Domain list)
–
Servers (Computer list)
–
See "Setting File Shares Access Policies" section on page
URL Object - If your policy applies to a predefined URL object, type the URL into the URL
field. See "Adding a Policy for a URL Object" section on page
IPv6 Address - If your policy applies to a specific host, enter the IPv6 address of the local
host machine in the IPv6 Address field. Optionally enter a port range (for example, 4100-
4200) or a single port number into the Port Range/Port Number field. See
for an IPv6 Address" section on page
IPv6 Address Range - If your policy applies to a range of addresses, enter the beginning
IPv6 address in the IPv6 Network Address field and the prefix that defines the IPv6
address range in the IPv6 Prefix field. Optionally enter a port range (for example, 4100-
4200) or a single port number into the Port Range/Port Number field. See
for an IPv6 Address Range" section on page
All IPv6 Address - If your policy applies to all IPv6 addresses, you do not need to enter
any IP address information. See
page 302.
298.
299.
"Adding a Policy for All Addresses" section on page
"Adding Network Objects" section on page 125
301.
302.
"Adding a Policy for All IPv6 Addresses" section on
"Adding a Policy for an
"Adding a Policy for an
299.
299.
300.
"Adding a Policy
"Adding a Policy