Adding A Custom Portal Logo - Dell SonicWall SRA 4200 Administrator's Manual

Adding a Custom Portal Logo

The Custom Logo Settings section allows the administrator to upload a custom portal logo and
to toggle between the default Dell SonicWALL logo and a custom uploaded logo. You must add
the portal before you can upload a custom logo. In the Add Portal screen, the Logo tab does
not have an option to upload a custom logo.
To add a custom portal logo, perform the following steps:
Navigate to Portals > Portals and click the configure button next to the existing portal to which
Step 1
you want to add a custom logo. The Edit Portal screen displays.
Click the Logo tab.
Step 2
Click the Browse... button next to the Upload Logo field. The file browser window displays.
Step 3
Select a proper sized .gif format logo in the file browser and click the Open button.
Step 4
Note
Select Light or Dark from the Background drop-down list. Select a background shade that will
Step 5
help set off your logo from the rest of the portal page.
Click the Update Logo button to transfer the logo to the SRA appliance.
Step 6
Click the Default Logo button to revert to the default Dell SonicWALL logo.
Step 7
Click Accept to save changes.
Step 8
The custom logo must be in GIF format. In a modern portal, there is a hard size limit
of 155x68 pixels. Anything larger than this will be cropped to fit the designated logo
space on the page. In a legacy portal, for the best aesthetic results, import a logo
with a transparent or light-colored background. The recommended, but not
mandatory, size is 155x36 pixels.
Portals Configuration | 141