Table of Contents
Advertisement
Setting up your operating system
CAUTION: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut
down the Edge Gateway.
Windows 10 LTSB 2015
Overview
The Edge Gateway is shipped with Windows 10 IoT Enterprise LTSB 2015. For more information on Windows 10 operating system,
see https://support.microsoft.com/en-us.
Boot up and login
1.
Connect a keyboard, mouse, and monitor to the Edge Gateway.
2.
Power on the Edge Gateway.
The system boots into Windows 10 IoT Enterprise LTSB 2015.
3.
Select your regional settings.
NOTE: If prompted for a product key, and one is already entered, select Do this later.
4.
Read and Agree the End User License Agreement.
5.
Connect to an available wireless or wired network.
6.
Create a user account.
Restoring Windows 10 IoT Enterprise LTSB 2015
You can restore Windows 10 IoT Enterprise LTSB 2015 on the Edge Gateway using the recovery Operating System image on the
boot partition which resets the run-time image back to the factory image.
1.
Connect a keyboard, mouse, and monitor to the Edge Gateway.
2.
Power on the Edge Gateway and boot to the operating system's desktop.
3.
Click the start icon, hold the Shift key and click Restart.
4.
Select Troubleshoot.
5.
Select Reset this PC.
6.
Select Remove everything.
7.
Select Fully clean the drive.
8.
Select Reset.
Windows 10 IOT Enterprise LTSB 2015 basic functions
BIOS Update
BIOS updates for the Edge Gateway may be downloaded from https://www.dell.com/support. The download will include an
executable that may be ran from the local machine.
30
4
Advertisement
Table of Contents
