Dell SonicWall SRA 4200 Administrator's Manual page 207

Sra 6.0
Table of Contents

Advertisement

To configure EPC for a local group, select Use global setting or Custom Setting from the
Recurring EPC drop-down list. If you select Use global setting, the local group inherits the
EPC settings from the Global group. If you select Custom Setting, the Check endpoint at
login and Check endpoint at login and every x minutes thereafter prompts are displayed
and you can configure EPC, as explained for the Global group.
Either select the Inherit global device profiles check box to use all defined Allow and Deny
Step 7
device profiles for the group.
OR
Add or remove profiles using the Edit EPC page:
To add or remove an Allow profile for the group, click the Add Allow Profiles button.
a.
In the Edit EPC page, select the profiles from the All Profiles list that you want to add
b.
to the group and click the Add selected profiles button. Selected profiles are then
moved to the In Use Profiles list on the page, which lists all device profiles that will be
used for the group.
To disable a profile without deleting it, clear the Enabled check box next to the profile.
c.
O enable a profile, select the Enabled check box. This allows you to selectively enable
or disable a profile that is used periodically.
To remove an Allow profile from the group, select the profile from the In Use Profiles
d.
list and click the Remove selected profiles button.
To add or remove a Deny profile for the group, click the Add Deny Profiles button and
e.
follow the preceding steps b and d.
Click the Accept button to save your changes.
Step 8
Figure 32
End Point Control - Add or Remove Device Profiles for Local Group
End Point Control | 207

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents