Table of Contents
Advertisement
Configuring Network Interfaces
The IP settings and interface settings of the SRA appliance may be configured by clicking on
the blue arrow in the corner of the Network Interfaces section of the System > Status page.
The link redirects you to the Network > Interfaces page, which can also be accessed from the
navigation bar. From the Network > Interfaces page, a SRA appliance administrator can
configure the IP address of the primary (X0) interface, and also optionally configure additional
interfaces for operation.
For a port on your SRA appliance to communicate with a firewall or target device on the same
network, you need to assign an IP address and a subnet mask to the interface.
For more information about configuring interfaces, refer to the
on page 115.
System > Licenses
This section provides an overview of the System > Licenses page and a description of the
configuration tasks available on this page. See the following sections:
•
•
•
System > Licenses Overview
Services upgrade licensing and related functionality is provided by the License Manager, which
runs on the SRA appliance. The License Manager communicates periodically (hourly) with the
Dell SonicWALL licensing server to verify the validity of licenses. The License Manager also
allows the administrator to purchase licenses directly or turn on free trials to preview a product
before buying.
Note Initial registration of the unit is required for the License Manager to work.
The System > Licenses page provides a link to activate, upgrade, or renew Dell SonicWALL
Security Services licenses. From this page in the SRA management interface, you can manage
all the Dell SonicWALL Security Services licenses for your SRA appliance.
88 | SRA 6.0 Administrator's Guide
"System > Licenses Overview" section on page 88
"Registering the SRA Appliance from System > Licenses" section on page 90
"Activating or Upgrading Licenses" section on page 92
"Network > Interfaces" section
Hide quick links:
Advertisement
Chapters
Table of Contents
