Dell SonicWall SRA 4200 Administrator's Manual page 163

The following sections describe how to configure the supported third-party authentication
servers:
•
•
Configuring the RSA Authentication Manager
The following sections describe how to configure the RSA Authentication Manager version 6.1
to perform two-factor authentication with your SRA appliance:
•
•
•
•
Note This configuration procedure is specific to RSA Authentication Manager version 6.1. If you
are using a different version of RSA Authentication Manager, the procedure will be slightly
different.
If you will be using VASCO instead of RSA, see
on page
Adding an Agent Host Record for the SRA Appliance
To establish a connection between the SRA appliance and the RSA Authentication Manager,
an Agent Host record must be added to the RSA Authentication Manager database. The Agent
host record identifies the SRA appliance within its database and contains information about
communication and encryption.
To create the Agent Host record for the SRA appliance, perform the following steps:
Launch the RSA Authentication Manager.
Step 1
"Configuring the RSA Authentication Manager" section on page 163
"Configuring the VASCO IdentiKey Solution" section on page 167
"Adding an Agent Host Record for the SRA Appliance" section on page 163
"Adding the SRA Appliance as a RADIUS Client" section on page 164
"Setting the Time and Date" section on page 165
"Importing Tokens and Adding Users" section on page 165
167.
"Configuring the VASCO IdentiKey Solution"
Portals Configuration | 163