Dell SonicWall SRA 4200 Administrator's Manual page 153

If adding the domain, select Active Directory from the Authentication type drop-down list.
Step 2
The Active Directory configuration fields will be displayed.
If adding the domain, enter a descriptive name for the authentication domain in the Domain
Step 3
Name field. This is the domain name users will select in order to log into the SRA appliance
portal. It can be the same value as the Server Address field or the Active Directory Domain
field, depending on your network configuration.
Enter the Active Directory domain name in the Active Directory Domain field.
Step 4
Enter the IP address or host and domain name of the Active Directory server in the Server
Step 5
Address field.
Enter the name of the layout in the Portal Name field. Additional layouts may be defined in the
Step 6
Portals > Portals page.
Optionally select the Allow Password Changes Check Box. Enabling this feature allows a user
Step 7
to change their password through the Virtual Office portal by selecting the Options button on
the top of the portal page. User must submit their old password, along with a new password and
a re-verification of the newly selected password.
Optionally select the Use SSL/TLS check box. This option allows for the needed SSL/TLS
Step 8
encryption to be used for Active Directory password exchanges. This check box should be
enabled when setting up a domain using Active Directory authentication.
Optionally select the Enable client certificate enforcement check box to require the use of
Step 9
client certificates for login. By checking this box, you require the client to present a client
certificate for strong mutual authentication. Two additional fields will appear:
Verify user name matches Common Name (CN) of client certificate - Select this check
•
box to require that the user's account name match their client certificate.
Verify partial DN in subject - Use the following variables to configure a partial DN that will
•
match the client certificate:
User name: %USERNAME%
–
Domain name: %USERDOMAIN%
–
Portals Configuration | 153