Users > Local Groups; Users > Local Groups Overview - Dell SonicWall SRA 4200 Administrator's Manual

Configuring End Point Control for Users
To configure the End Point Control profiles used by a local user, perform the following steps:
Navigate to the Users > Local Users page.
Step 1
Click the configure icon next to the user to be configured for EPC. The Edit Local User window
Step 2
is displayed.
Click the EPC tab. The EPC window is displayed.
Step 3
Configure EPC user settings and add or remove device profiles, as explained in "Users > Local
Step 4
Users > Edit EPC Settings" on page 208.
Users > Local Groups
This section provides an overview of the Users > Local Groups page and a description of the
configuration tasks available on this page.
•
•
•
•
•
•
•
For a description of global settings for local groups, see the
page
Users > Local Groups Overview
The Users > Local Groups page allows the administrator to add and configure groups for
granular control of user access by specifying a group name and domain.
Note that a group is automatically created when you create a domain. You can create domains
in the Portals > Domains page. You can also create a group directly from the Users > Local
Groups page.
Figure 54
Group memberships are split into two groups, 'primary' and 'additional'.
314 | SRA 6.0 Administrator's Guide
"Users > Local Groups Overview" section on page 314
"Deleting a Group" section on page 315
"Adding a New Group" section on page 315
"Editing Group Settings" section on page 316
"Group Configuration for LDAP Authentication Domains" section on page 329
"Group Configuration for Active Directory, NT and RADIUS Domains" section on page 333
"Creating a Citrix Bookmark for a Local Group" on page 336
336.
Users > Local Groups Page
"Global Configuration" section on