Dell Networking N4000 Series Configuration Manual page 703

Figure 21-29. LAG Settings
6 Configure port 1 as a trunk port.
From the Switching → VLAN → Port Settings page, make sure port
a
Gi1/0/1 is selected.
From the Port VLAN Mode field, select Trunk.
b
Click Apply.
c
Figure 21-30. Trunk Port Configuration
7 From the Switching → VLAN → VLAN Membership page, verify that
port 1 is marked as a tagged member (T) for each VLAN.
Figure 21-31 shows VLAN 200, in which port 1 is a tagged member, and
ports 13–16 are untagged members.
Configuring VLANs
703