Stack Summary - Dell Networking N4000 Series Configuration Manual

Changing the ID or Switch Type for a Stack Member
To change the switch ID or type:
1 Open the Unit Configuration page.
2 Click Add to display the Add Unit page.
Figure 9-3. Add Remote Log Server Settings
3 Specify the switch ID, and select the model number of the switch.
4 Click Apply.

Stack Summary

Use the Stack Summary page to view a summary of switches participating in
the stack.
To display the Stack Summary page, click System → Stack Management →
Stack Summary in the navigation panel.
Figure 9-4. Stack Summary
Managing a Switch Stack
185