Dell Networking N4000 Series Configuration Manual page 627

Command
days-of-the-
periodic {
week time days-of-
} to {[
the-week time
] }
CTRL + Z
name
show time-range [
Purpose
Configure a recurring time entry for the named time
range.
days-of-the-week
•
starting day(s) the ACL goes into effect. The second
occurrence is the ending day(s) when the ACL rule is no
longer in effect. If the end
as the start, they can be omitted
This variable can be any single day or combinations of
days: Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday, Sunday. Other possible values are:
– daily -- Monday through Sunday
– weekdays -- Monday through Friday
– weekend -- Saturday and Sunday
time
• — Time the ACL rule starts going into effect (first
occurrence) or ends (second occurrence). The time is
expressed in a 24-hour clock, in the form of
hours:minutes.
Exit to Privileged EXEC mode.
] View information about all configured time ranges,
including the absolute/periodic time entries that are
defined for each time range. Use the
information about the specified time range.
Configuring Access Control Lists
—The first occurrence indicates the
days-of-the-week
name
are the same
variable to view
627