Dell Networking N4000 Series Configuration Manual page 704

Figure 21-31. Trunk Port Configuration
8 Configure the MAC-based VLAN information.
Go to the Switching → VLAN → Bind MAC to VLAN page.
a
In the MAC Address field, enter a valid MAC address, for example
b
00:1C:23:55:E9:8B.
In the Bind to VLAN field, enter 300, which is the Sales VLAN ID.
c
Click Apply.
d
Figure 21-32. Trunk Port Configuration
Repeat steps b–d to add additional MAC address-to-VLAN
e
information for the Sales department.
9 To save the configuration so that it persists across a system reset, use the
following steps:
Go to the System → File Management→ Copy Files page
a
Select Copy Configuration and ensure that Running Config is the
b
source and Startup Config is the destination.
Click Apply.
c
704
Configuring VLANs