Default Settings - Dell Networking N4000 Series Configuration Manual

Default Settings

This section describes the default settings for many of the software features
on the Dell Networking series switches.
Table 6-1. Default Settings
Feature
IP address
Subnet mask
Default gateway
DHCP client
VLAN 1 Members
SDM template
Users
Minimum password length
IPv6 management mode
SNTP client
Global logging
Switch auditing
CLI command logging
Web logging
SNMP logging
Console logging
RAM logging
Persistent (FLASH) logging
DNS
SNMP
Default
None
None
None
Enabled on out-of-band (OOB) interface.
All switch ports
Dual IPv4 and IPv6 routing
None
8 characters
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled (Severity level: debug and above)
Enabled (Severity level: debug and above)
Disabled
Enabled (No servers configured)
Enabled (SNMPv1)
Default Settings
6
143