Dell Networking N4000 Series Configuration Manual page 956

• An N/A entry indicates that state synchronization is not required (usually
for a link local protocol) and the feature can be configured on an MLAG
VLAN or MLAG-associated links. In some cases, it may be necessary to
configure an N/A feature identically on the MLAG peer switches for it to
work properly; e.g., port mirroring for an MLAG link must be configured
on both MLAG peer switches to capture the conversation from the MLAG
partner switch.
• A Yes entry indicates that the feature may be configured on an MLAG
VLAN and will synchronize state across the MLAG peers. The
configuration for features marked Yes must be identical on both switches.
MLAG does not synchronize configuration with the MLAG peer.
• A No entry indicates that the switch feature does not synchronize state
across the MLAG peers and the feature may not be configured on an
MLAG VLAN.
Table 28-2. MLAG State Synchronization Per Feature
Components
DOT1Q
Protocol Based VLANs/802.1v
GARP
GVRP
GMRP
DOT1P
Unauthenticated VLAN
Voice VLAN
Guest VLAN
MAC Authentication Bypass
Broadcast Storm Recovery
DOT3AD
LAG Hashing
Port Mirroring
MAC Filter
956
Configuring Link Aggregation
MLAG State Synchronization Support
Yes
No
No
No
No
No
No
No
No
No
No
Yes
Yes
N/A
N/A