Dell Networking N4000 Series Configuration Manual page 572

Command
group-id
user group
name
[name ]
user-id
user name
user-id
user password
password
user-id
user group
id
user-id
user session-
timeout
timeout
group-id
user group
new-group-id
moveusers
CTRL + Z
show captive-portal user
user-id
[ ]
572
Configuring Port and System Security
Purpose
Configure a group. Each Captive Portal that requires
authentication has a group associated with it. Only the
users who are members of that group can be authenticated
if they connect to the Captive Portal.
group-id
•
name
• — Group name (Range: 1–32 characters).
name
Create a new user for the local user authentication
database.
user-id
• —User ID (Range: 1–128).
name
• —user name (Range: 1–32 characters).
Configure the password for the specified user.
user-id
• —User ID (Range: 1–128).
password
•
group-
Associate a group with a Captive Portal user. A user can be
associated with more than one group.
user-id
• — User ID (Range: 1–128).
group-id
•
Enter the number of seconds to wait before terminating a
session for the specified user. The user is logged out once
the session timeout is reached.
user-id
• — User ID (Range: 1–128).
timeout
•
enforced (Range: 0–86400 seconds)
(Optional) Move all of the users in a group to a different
group. This command removes the users from the group
specified by
group-id
•
new-group-id
•
Exit to Privileged EXEC mode.
View summary information about all users configured in
the local database. Specify the user ID to view additional
information about a user.
user-id
— User ID (Range: 1–128).
— Group ID (Range: 1–10).
—User password (Range: 8–64 characters).
— Group ID (Range: 1–10).
— Session timeout. 0 indicates timeout not
group-id
.
— Group ID (Range: 1–10).
— Group ID (Range: 1–10).